location: Home > Products > Solids Control Equipment >
Screw Pump
source:admin time:2021-09-30

Screw pump is an ideal pump for feeding to decanter centrifuge. The main parts are screw shaft (rotor) and screw shaft bushing (stator),Cause the special geometry shape of the two parts, form pressurize capacity separately. The fluids flow along with the shaft,  slow inner flow speed, capacity remains, steady pressure, meanwhile it will not generate vortex and agitating.It can drive by coupler, or adjust the speed by using variable speed motor, Triangle Vbelt, gear box, etc.Rotor and stator are wear parts of this pump, it is convenient to replace.
Flow rate

Power Inlet Nozzle Caliber
Ex Standard

HYG10A-040 10㎥/h 0.3MPA 4KW 3 3 ExdIIBt4  /  IECEX  /  A-TEX 245kg 2245×320×550mm
HYG20A-055 20㎥/h 5.5KW 3 3 323KG 2450×340×562mm
HYG30A-075 30㎥/h 7.5KW 4 4 386kg 2761×370×600mm
HYG40A-110 40㎥/h 11KW 5 5 454kg 3270×370×665mm
HYG50A-110 50㎥/h 11KW 5 5 608kg 3790×400×782mm
HYG60A-115 50㎥/h 15KW 5 5 649kg 3322×550×740mm
HYG70A-220 70㎥/h 22KW 6 6 875kg 3740×420×785mm
HYG80A-220 80㎥/h 22KW 6 6 875kg 3740×420×785mm
HYG90A-220 90㎥/h 22KW 6 6 875kg 3740×420×785mm

Features and Benefits
1.Shaft of the pump is made from stainless steel, complete stainless steel body is optional.
2.Less accessories,compatible  structure, small volume,easy maintenance.
3.Stator is made of elastomeric material, it has particular advantages than other pump to transfer the fluids with high viscosity and hard suspended particles.

@2017 Huayang Oil&Gas. All right reserved.